VANTAGE 12V DC Linear Operator with Piston Drive Stroke 500mm V4
Availability: In Stock
₦601,409.75
VANTAGE 12V DC linear operator with Piston Drive, Colour Grey - Stroke 500mm V3.
Kit includes
- Operator only
Features
- Motor voltage – 12V DC (battery-driven)
- Battery backup
- 250Kg Operator push force
- 500mm Operator stroke
- 250 Max number of operations a day
- Operations on standby with 12V 7Ah battery 70 half day and 58 full day
- Manual override by key release
- New
VX SMART Controller & Wallbox inc 2 x NOVA TX4
Availability: In Stock
₦630,224.15
SPECIFICATIONS OF THE VANTAGE VX SMART CONTROLLER:
Additional information pertaining to the Vantage Vx SMART Controller:
1. Limited by charger, ensure that load does not prevent battery from fully charging.
Continuous current draw should ideally be less than 500mA but must not exceed 1A.
2. Operators connected, no ancillaries fitted
SPECIFICATIONS OF THE POWER SUPPLY:
Warnings and Limitations on the Vx SMART Controller:
1. All installations must be done by a suitable qualified technician
2. Under no circumstances may any of the components be modified.
WHAT’S IN THE BOX:
1 x Centurion Vantage Vx SMART Controller and Charger
1 x Vx SMART Wall Box
2 x Centurion Nova 4 Button Remotes
- New
Cable VECTOR2 - 2 core X 2.0mm, 4 core X 0.5mm, Screened, per metre
Availability: In Stock
₦7,817.70
Centurion Cable Vector2 2 Core X 2.0mm, 4 Core X 0.5mm, Screened Per 25m Roll for R821.35
- New
Cable VECTOR2 - 2 core X 2.0mm, 4 core X 0.5mm, Screened per 25m Roll
Availability: In Stock
₦187,370.65
Cable VECTOR2 - 2 core X 2.0mm, 4 core X 0.5mm, Screened per 25m Roll
- New
R6 Standard Torque Rotary Arm Operator
1: No wind opening time ~ 12s. Gate opening and closing times will increase as wind speed increases.
2: Fit an electric gate lock if the leaf width is greater than 3 metres.
1: No wind opening time ~ 15s. Gate opening and closing times will increase as wind speed increases.
2: Fit an electric gate lock if the leaf width is greater than 3 metres.
Availability: In Stock
₦1,210,231.25
| TECHNICAL SPECIFICATIONS | R6 SWING | |
|---|---|---|
| Input voltage | 90V - 240V AC 1 | |
| Motor voltage | 12V DC | |
| Current Consumption (mains) | ||
| CP13E | 80mA (90V - 240V AC +/-10% @ 50Hz1) | |
| CP84SM | 170mA (90V - 240V AC +/-10% @ 50Hz1) | |
| Maximum DC Current Draw | 16A | |
| Maximum Output Torque | ||
| Standard-torque operator | 300Nm | |
| High-torque operator | 390Nm | |
| Power Supply3 | ||
| Domestic | 0.8A CP13E, 7.2Ah Battery | |
| Light-industrial | 1.8A CP84SM, 7.2Ah Battery | |
| Industrial | 1.8A CP84SM, 33Ah Battery |
| Maximum Daily Operations | Mains present | Back-up2 | |||
|---|---|---|---|---|---|
| Double Leaf | Single Leaf | Double Leaf | Single Leaf | ||
| Domestic | 20 | 30 | 20 | 30 | |
| Light-industrial | 250 | 250 | 40 | 60 | |
| Industrial | 250 | 250 | 250 | 250 |
| Maximum Daily Continuous Operations | Mains present | Mains present | |
|---|---|---|---|
| Double leaf | Single leaf | ||
| Domestic | 20 | 30 | |
| Light-industrial | 50 | 50 | |
| Industrial | 100 | 100 |
| SPECIFICATIONS CONTINUE | ||
|---|---|---|
| Typical Gate Operating Time: Standard-torque operator / High-torque operator | 12s / 15s | |
| Mass of Motor Kit4 (excluding pedestal or wall bracket) | 15kg | |
| Collision Sensitivity | Electronic - Adjustable | |
| Temperature Range | -15°C to +50°C | |
| Housing Protection | IP55 |
1: R6 Swing gate motor can operate off a solar supply, please consult Centurion Systems (Pty) Ltd for assistance.
2: These values are based on fully charged batteries, derate accordingly based on connected ancillaries.
3: Choose appropriate variation based on site requirements.
4: The weight of an operator kit (regardless of Master or Slave).
GATE SPECIFICATIONS
R6 Standard-Torque Operator
| Gate Length (m) | 1.5 | 2 | 2.5 | 32 | 3.52 | 42 | 4.52 | 52 | |
| Gate Height (m) | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
| Max Mass (Kg) | 500 | 500 | 480 | 330 | 240 | 185 | 145 | 120 | |
| Allowable Wind Speed For 25% Clad (Km/h)1 | 114 | 84.7 | 67.3 | 56.9 | 49.2 | 43.2 | 38.6 | 34.8 | |
| Allowable Wind Speed For 100% Clad (Km/h)1 | 57 | 42.4 | 33.6 | 28.5 | 24.6 | 21.6 | 19.3 | 17.4 |
1: No wind opening time ~ 12s. Gate opening and closing times will increase as wind speed increases.
2: Fit an electric gate lock if the leaf width is greater than 3 metres.
R6 High-Torque Operator
| Gate Length (m) | 1.5 | 2 | 2.5 | 32 | 3.52 | 42 | 4.52 | 52 | |
| Gate Height (m) | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
| Max Mass (Kg) | 750 | 750 | 620 | 430 | 315 | 240 | 190 | 155 | |
| Allowable Wind Speed For 25% Clad (Km/h)1 | 128.4 | 95 | 76.3 | 64.6 | 55.9 | 49.2 | 43.9 | 39.6 | |
| Allowable Wind Speed For 100% Clad (Km/h)1 | 64.2 | 47.5 | 38.1 | 32.3 | 27.9 | 24.6 | 21.9 | 19.8 |
1: No wind opening time ~ 15s. Gate opening and closing times will increase as wind speed increases.
2: Fit an electric gate lock if the leaf width is greater than 3 metres.
- New
R6 High Torque Rotary Arm Operator
Availability: In Stock
₦1,222,331.55
- Mains: 220V - 240V AC 50Hz
- Motor Voltage: 12V DC
- Max. Output Torque: 390 Nm
- Max. Duty Cycle with Main & Battery Back up: Single Swing 250 Doubl
- Motor Weight: 15Kg
- Typical Gate Operating Time: 15s
- New
Product category- Home automation
