product sub-categories - Autogate

Welcome To Axume Marketplace

Sort by:
D10 SMART industrial and commercial sliding gate motor D10 SMART industrial and commercial sliding gate motor
D10 SMART industrial and commercial sliding gate motor
Availability: In Stock
₦1,656,610.80

Technical Specifications:

D10-SMARTD10 TURBO-SMART
Input voltage90V - 240V AC +/-10% @ 50Hz 190V - 240V AC +/-10% @ 50Hz1
Current consumption (Mains)250mA250mA
Battery charger current output1.8A @ 27.4V +/-1%1.8A @ 27.4V +/-1%
Maximum number of operations per day750 3, 6750 3, 6
Duty cycle - Mains present2, 345%25%
Motor voltage24V DC24V DC
Motor power supplyBattery-driven (Standard Capacity - 2x 12V 7.2Ah)Battery-driven (Standard Capacity - 2x 12V 7.2Ah)
Current consumption (motor at rated load)8A10A
Input / Output sink currents (Max accessory current draw)
I/O 1-4100mA (12/24V)100mA (12/24V)
I/O 5 and 63A (12/24V) 10sec Pulse3A (12/24V) 10sec Pulse
Motor push force - starting40Kgf24Kgf
Motor push force - rated30Kgf18kgf
Gate mass - maximum1000Kg250kg8
Gate length - maximum50m50m
Gate speed (varies with load)4Up to 26m/min4Up to 45m/min8
Manual OverrideLockable with key releaseLockable with key release
Drive Pinion17T Module 420T Module 4
Operations in standby with 2x 7Ah batteriesPower saving (15m/min 15kgf) Normal (26m/min 15kgf)Power saving (15m/min 9kgf) Normal (45m/min 9kgf)
Half day2, 5, 6118 | 63189 | 130
Full day2, 5, 693 | 50150 | 104
Collision SensingElectronicElectronic
Operating temperature range-15°C to +50°C-15°C to +50°C
Onboard receiver typeCode-hopping multichannel receiver with selective add and deleteCode-hopping multichannel receiver with selective add and delete
Receiver code storage capacity1500 Remotes71500 Remotes7
Receiver frequency433.92MHz433.92MHz
Degree of protectionIP54IP54
Mass of unit packed (with standard kit, but excl. rack and battery)13Kg13.5Kg
Packaging dimensions (with standard kit, but excl. rack and battery)350mm wide x 282mm deep x 470mm high350mm wide x 282mm deep x 470mm high
  1. Can operate off a solar supply, consult your local dealer for assistance
  2. Based on 25°C ambient temperature and unit not in direct sunlight
  3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
  4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
  5. Can increase battery capacity for longer standby times
  6. Based on 4m gate, excluding all accessories
  7. Multiple buttons per remote can be used
  8. Refer to the table below for D10 TURBO SMΔRT’s recommended gate speed for specified gates masses
  • New
D20 SMART sliding gate motor for heavy gates D20 SMART sliding gate motor for heavy gates
D20 SMART sliding gate motor for heavy gates
Availability: In Stock
₦1,900,000.00

Technical Specifications:

Input voltage90V - 240V AC +/-10% @ 50Hz1
Current consumption (Mains)250mA
Battery charger current output1.8A @ 27.4V +/-1%
Maximum number of operations per day750.2, 5
Duty cycle - Mains present2, 345%
Motor voltage24V DC
Motor power supplyBattery-driven (Standard Capacity - 2x 7.2Ah)3
Current consumption (motor at rated load)9A
Input / Output sink currents (Max accessory current draw)
I/O 1-4100mA (12/24V)
I/O 5 and 63A (12/24V) 10sec Pulse
Motor push force - starting52kgf
Motor push force - rated39kgf
Gate mass - maximum2000kg
Gate length - maximum25m
Gate speed (varies with load)2, 5Up to 18m/min3
Manual OverrideLockable lever with key release
Drive Pinion13T Module 4
Operations in standby with 2x 7.2Ah batteriesPower Saving (15m/min 20kgf) | Normal (18m/min 20kgf)
Half day2, 3, 4101 | 55
Full day2, 3, 480 | 45
Collision SensingElectronic
Operating temperature range-15°C to +50°C
Onboard receiver typeCENTURION rolling code (Keeloq encryption) multichannel
Receiver code storage capacity1500 Remotes6
Receiver frequency433.92MHz
Degree of protectionIP54
Mass of unit packed (with standard kit, but excl. rack and battery)13Kg
Packaging dimensions (with standard kit, but excl. rack and battery)350mm wide x 282mm deep x 470mm high

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

  • New
D6 SMART gate motor D6 SMART gate motor
D6 SMART gate motor
Availability: In Stock
₦1,121,492.65

All the most innovative technological features 

  • Onboard multichannel NOVA receiver with 1500 button memory
  • Wireless and effortless – easy setup and configuration from your smartphone
  • 24V system capable of performing more operations and offering extended battery backup and power failure autonomy
  • New and improved theft-resistant cage with a patented design offering outstanding security and peace of mind
  • Vibration sensor that can be connected to a third party device to notify you in the event that the gate motor is being tampered with
  • Intelligent battery charger with onboard diagnostics and SMART communication between the charger and the controller
  • Improved position control system incorporating hall effect technology – highly resistant to interference
  • Individually-configurable inputs and outputs
  • Convenient and intuitive single-action manual release
Technical DataD6-SMART
Input voltage (1)90V - 240V AC +/-10% @ 50Hz
Current consumption (Mains)200mA
Battery charger current output1.3A
Maximum number of operations per day150
Duty cycle - Mains present (2, 3)50%
Motor voltage24V DC
Motor power supply (5)Battery-driven (Standard Capacity - 2x12V)
Current consumption (motor at rated load)13A
Input / Output sink currents (Max accessory current draw)
I/O 1-4100mA (12/24V)
I/O 5 and 63A (12/24V) 10sec Pulse
Motor push force - starting30kgf
Motor push force - rated17kgf
Gate mass - maximum600Kg
Gate length - maximum100m
Gate speed (varies with load) (4)35m/min @ 17kgf
Manual OverrideLockable with key release
Operations in standby with 2 x 7Ah (28W) battery
Half day (5, 6)209 (Power Saving)/ 102 (Normal)
Full day (5, 6)183 (Power Saving)/ 79 (Normal)
Collision SensingElectronic
Operating temperature range-15°C to +50°C
On-board receiver typeCode-hopping multichannel receiver with selective add and delete
Receiver code storage capacity (7)1500 Remotes
Receiver frequency433.92MHz
Degree of protectionIP55
Mass of unit packed (with standard kit, but excl. rack and battery)9.1kg
Packaging dimensions (with standard kit, but excl. rack and battery)325mm wide x 244mm deep x 445mm high

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending
on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

  • New
D3 SMART 12V DC Sliding Gate Operator Kit - Raz Rack - 300kg D3 SMART 12V DC Sliding Gate Operator Kit - Raz Rack - 300kg
D3 SMART 12V DC Sliding Gate Operator Kit - Raz Rack - 300kg
Availability: In Stock
₦753,030.35

Technical Specifications   

  • Input voltage 110V - 240V AC 50/60Hz
  • Current consumption (mains) 320mA peak
  • DX 12V Battery charger current output 1.8A @ 14.3V +/- 5% (28W)
  • Maximum number of operations per day 20
  • Duty cycle - Mains present 25%
  • Motor power supply    Battery-driven (Standard Capacity - 1x12V)
  • Current consumption (motor at rated load)  11A
  • Receiver code storage capacity 32 Remotes
  • Mass of unit packed (with standard kit, but excl. Rack and Battery) 6.7kg

Kit Includes

  • Operator
  • DX Controller
  • Charger
  • 2 x 4 Button NOVA Remote Transmitters
  • 4m RAZ Rack
  • Excludes Foundation Plate
  • New
D5 EVO SMART 12V DC Sliding Gate Operator Kit - Raz Rack - 500kg D5 EVO SMART 12V DC Sliding Gate Operator Kit - Raz Rack - 500kg
D5 EVO SMART 12V DC Sliding Gate Operator Kit - Raz Rack - 500kg
Availability: In Stock
₦927,611.85

(Kit Includes : Operator, Controller, 12V Charger, (CP4C2) 7.2Ah Battery, 4m Steel Rack and 2 x 4 Button NOVA Txs. – Excludes Foundation Plate)

  • New
D10 Smart 24V DC Sliding Gate Operator Kit - Steel Rack - 1000kg D10 Smart 24V DC Sliding Gate Operator Kit - Steel Rack - 1000kg
D10 Smart 24V DC Sliding Gate Operator Kit - Steel Rack - 1000kg
Availability: In Stock
₦1,752,986.40

Description

(Kit includes : Operator, DX Controller, DX Charger 24V 1.8A, 2 x (CP4C2) 7.2Ah Batteries, 4m Steel Rack – Excludes Foundation Plate)


Additional information

Weight35 kg
  • New
D10 Smart Turbo 24V DC Sliding Gate Operator Full Kit - Steel Rack - 250 - 1000kg D10 Smart Turbo 24V DC Sliding Gate Operator Full Kit - Steel Rack - 250 - 1000kg
D10 Smart Turbo 24V DC Sliding Gate Operator Full Kit - Steel Rack - 250 - 1000kg
Availability: In Stock
₦2,173,236.65

Technical Specifications:

D10-SMARTD10 TURBO-SMART
Input voltage90V - 240V AC +/-10% @ 50Hz 190V - 240V AC +/-10% @ 50Hz1
Current consumption (Mains)250mA250mA
Battery charger current output1.8A @ 27.4V +/-1%1.8A @ 27.4V +/-1%
Maximum number of operations per day750 3, 6750 3, 6
Duty cycle - Mains present2, 345%25%
Motor voltage24V DC24V DC
Motor power supplyBattery-driven (Standard Capacity - 2x 12V 7.2Ah)Battery-driven (Standard Capacity - 2x 12V 7.2Ah)
Current consumption (motor at rated load)8A10A
Input / Output sink currents (Max accessory current draw)
I/O 1-4100mA (12/24V)100mA (12/24V)
I/O 5 and 63A (12/24V) 10sec Pulse3A (12/24V) 10sec Pulse
Motor push force - starting40Kgf24Kgf
Motor push force - rated30Kgf18kgf
Gate mass - maximum1000Kg250kg8
Gate length - maximum50m50m
Gate speed (varies with load)4Up to 26m/min4Up to 45m/min8
Manual OverrideLockable with key releaseLockable with key release
Drive Pinion17T Module 420T Module 4
Operations in standby with 2x 7Ah batteriesPower saving (15m/min 15kgf) Normal (26m/min 15kgf)Power saving (15m/min 9kgf) Normal (45m/min 9kgf)
Half day2, 5, 6118 | 63189 | 130
Full day2, 5, 693 | 50150 | 104
Collision SensingElectronicElectronic
Operating temperature range-15°C to +50°C-15°C to +50°C
Onboard receiver typeCode-hopping multichannel receiver with selective add and deleteCode-hopping multichannel receiver with selective add and delete
Receiver code storage capacity1500 Remotes71500 Remotes7
Receiver frequency433.92MHz433.92MHz
Degree of protectionIP54IP54
Mass of unit packed (with standard kit, but excl. rack and battery)13Kg13.5Kg
Packaging dimensions (with standard kit, but excl. rack and battery)350mm wide x 282mm deep x 470mm high350mm wide x 282mm deep x 470mm high
  1. Can operate off a solar supply, consult your local dealer for assistance
  2. Based on 25°C ambient temperature and unit not in direct sunlight
  3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
  4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
  5. Can increase battery capacity for longer standby times
  6. Based on 4m gate, excluding all accessories
  7. Multiple buttons per remote can be used
  8. Refer to the table below for D10 TURBO SMΔRT’s recommended gate speed for specified gates masses
  • New
D3 SMART Sliding Gate Operator Kit incl. DX Controller, Charger, 2 X 4 Button Nova Remotes D3 SMART Sliding Gate Operator Kit incl. DX Controller, Charger, 2 X 4 Button Nova Remotes
D3 SMART Sliding Gate Operator Kit incl. DX Controller, Charger, 2 X 4 Button Nova Remotes
Availability: In Stock
₦919,883.85
Technical SpecificationsD3 SMART
Input voltage(1)110V - 240V AC 50/60Hz (1)
Current consumption (mains)320mA peak
Dx12V Battery charger current output1.8A @ 14.3V +/- 5% (28W)
Maximum number of operations per day20 (3,6)
Duty cycle - Mains present (2,3)25%
Motor power supplyBattery-driven (Standard Capacity - 1x12V)
Current consumption (motor at rated load)11A

This equipment is compliant with the radiated emissions requirements of EN 55032 / CISPR 32 for Class B devices, which intends to offer adequate protection to broadcast services within the residential environment.

Technical Specifications ContinuedD3 SMART
Fuse ProtectionType | Rating
Main Control CardServiceable | 35A
Aux. SupplyResetable Fuse | 12V 300mA MAX (10sec Pulse)
Charger (Mains Supply)Non-serviceable | 3A slow-blow
Motor push force - starting18kgf
Motor push force - rated12kgf
Gate mass - maximum300kg
Gate speed (varies with load) (4)Maximum: Up to 24m/min Rated: Up to 21m/min
Manual OverrideLockable with key release
Operations whilst in Battery backup mode with 7.2Ah BatteryOperating Mode
Up to 24m/min 7kgf | Up to 24m/min 12kgf
Half day (5,6,8)90 | 80
Full day (5,6,8)70 | 65
Collision SensingElectronic
Operating temperature range-15°C to +50°C
Onboard receiver typeCode-hopping multichannel receiver with selective add and delete
Receiver code storage capacity32 Remotes (7)
Receiver frequency433.92MHz
Degree of protectionIP55
Mass of unit packed (with standard kit, but excl. Rack and Battery)6.7kg
Packaging dimensions (with standard kit, but excl. Rack and Battery)325mm wide x 245mm deep x 395mm high

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5. Can increase Battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
8. Dependant on the type and condition of the Battery

  • New
D10 SMART Turbo Rack Drive Operator - excludes Foundation Plate, Batteries & Rack D10 SMART Turbo Rack Drive Operator - excludes Foundation Plate, Batteries & Rack
D10 SMART Turbo Rack Drive Operator - excludes Foundation Plate, Batteries & Rack
Availability: In Stock
₦1,572,519.35
  • Turbo speed for the best security and convenience, varies with load
  • Taking intelligence to the next level
  • SMART connectivity provide the best experience for installers
  • Intelligent theft and break-in protection with an integral vibration sensor
  • More secure manual release mechanism
  • Uninterrupted convenience with 24V battery backup
  • In-app diagnostics and logs, monitoring system health in real time
  • Improved wire routing
  • SMART universal controller – compatible with all CENTURION SMART solutions
Weight14 kg
Dimensions35 × 29 × 47 cm
  • New
D20 SMART Rack Drive Operator 2000kg - excludes Foundation Plate, Batteries & Rack D20 SMART Rack Drive Operator 2000kg - excludes Foundation Plate, Batteries & Rack
D20 SMART Rack Drive Operator 2000kg - excludes Foundation Plate, Batteries & Rack
Availability: In Stock
₦1,731,760.00

Main features:

  • Strong enough to move a 2t gate
  • Easy "drop-in" replacement for existing A10 sites
  • SMART technology makes the D20 SMART as intelligent as it's solid
  • Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
  • Smooth and strong
  • Alert and agile highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping

excludes Foundation Plate, Batteries & Rack

  • New
Single VANTAGE 500 SMART KIT - Max Leaf Width 4.0m, 200k Single VANTAGE 500 SMART KIT - Max Leaf Width 4.0m, 200k
Single VANTAGE 500 SMART KIT - Max Leaf Width 4.0m, 200k
Availability: In Stock
₦584,160.90
Input Voltage90v - 240V AC +/- 10%, 50/60Hz 1
Motor Voltage12V DC
Motor Power SupplyBattery-driven 2 1.8A Charger
Push Force - Max250kgf
Typical Gate Opening TimeV400 (short stroke) 14.3 sec / V500 (long stroke) 17.8 sec (V500)
Duty Cycle - Mains Present50% 3
Daily Operations - Max250
Maximum Leaf Width for Corresponding Gate Mass (90° opening) 4V400 ,2.5m = 500kg <4m = 150kg V500 ,2.5m = 750kg <4m = 230kg
Onboard Receiver SpecificationCENTURION code-hopping, multichannel, 433MHz, Capacity - 65 transmitter buttons
  • New
R6 Wall Box Domestic PSU Assy R6 Wall Box Domestic PSU Assy
R6 Wall Box Domestic PSU Assy
Availability: In Stock
₦512,599.85

R6 Wall Box Domestic PSU Assy

  • New
Centurion Swing R6 Drive Arm Assembly 250mm Centurion Swing R6 Drive Arm Assembly 250mm
Centurion Swing R6 Drive Arm Assembly 250mm
Availability: In Stock
₦293,033.80

Centurion Swing R6 Drive Arm Assembly 250mm

  • New
Centurion Swing R6 Drive Arm Assembly 400mm Centurion Swing R6 Drive Arm Assembly 400mm
Centurion Swing R6 Drive Arm Assembly 400mm
Availability: In Stock
₦318,362.55

Centurion Swing R6 Drive Arm Assembly 400mm

  • New
Centurion Swing Accessory R6 Drive Arm Assembly 500mm Centurion Swing Accessory R6 Drive Arm Assembly 500mm
Centurion Swing Accessory R6 Drive Arm Assembly 500mm
Availability: In Stock
₦362,225.85

Centurion Swing Accessory R6 Drive Arm Assembly 500mm

  • New
SECTOR II 3m High Volume Barrier Kit 430 Stainless Steel, Round Pole SECTOR II 3m High Volume Barrier Kit 430 Stainless Steel, Round Pole
SECTOR II 3m High Volume Barrier Kit 430 Stainless Steel, Round Pole
Availability: In Stock
₦3,602,003.55

The SECTOR II 3m high-volume barrier offers the best security for commercial, residential and industrial sites, while simultaneously making life easier for installers thanks to its innovative mechanical design and electronics that reside at the top of the enclosure. The Centurion barriers offers quick and easy commissioning via an intuitive graphic interface flush with features.

This high-volume barrier helps to guard against unauthorised access, tailgating, vehicle theft and circumvention of paid parking systems with its rapid lowering of the boom pole, thereby significantly increasing security. The barrier is also tough enough to work reliably no matter where it is installed. When Centurion developed the SECTOR II high-volume barrier, they didn’t cut any corners to ensure that it is a steadfast solution of the highest quality and durability.

A hard-driving, high-powered gearbox and tough-as-nails enclosure deliver the ultimate in long-term performance. These features place the SECTOR II high-volume traffic barrier in a class by itself.

The Sector II 3m high-volume barrier comes with an updated look that perfectly matches its superior performance and an optimized design for the ultimate in ease of installation. Boasting the awe-inspiring speed that made its predecessor king of the access control jungle, the SECTOR II is the embodiment of automation evolution. 

Features
  • High-volume capability
  • Battery backup
  • Smooth, intelligent speed control

This Kit Includes

  • Operator – 430 Stainless steel (Epoxy Coated)
  • Controller
  • 2A SM Charger
  • 7.2 Ah Battery
  • 3m Boom Pole
  • New

product sub-categories - Autogate

busy...

We use cookies to improve user experience, and analyze website traffic. For these reasons, we may share your site usage data with our analytics partners. By continuing to the site, you consent to store on your device all the technologies described in our cookie policy. Here is the the cookie policy