Product category- Auto-Gate

Welcome To Axume Marketplace

Sort by:
D10 SMART industrial and commercial sliding gate motor D10 SMART industrial and commercial sliding gate motor
D10 SMART industrial and commercial sliding gate motor
Availability: In Stock
₦1.7M

Technical Specifications:

D10-SMARTD10 TURBO-SMART
Input voltage90V - 240V AC +/-10% @ 50Hz 190V - 240V AC +/-10% @ 50Hz1
Current consumption (Mains)250mA250mA
Battery charger current output1.8A @ 27.4V +/-1%1.8A @ 27.4V +/-1%
Maximum number of operations per day750 3, 6750 3, 6
Duty cycle - Mains present2, 345%25%
Motor voltage24V DC24V DC
Motor power supplyBattery-driven (Standard Capacity - 2x 12V 7.2Ah)Battery-driven (Standard Capacity - 2x 12V 7.2Ah)
Current consumption (motor at rated load)8A10A
Input / Output sink currents (Max accessory current draw)
I/O 1-4100mA (12/24V)100mA (12/24V)
I/O 5 and 63A (12/24V) 10sec Pulse3A (12/24V) 10sec Pulse
Motor push force - starting40Kgf24Kgf
Motor push force - rated30Kgf18kgf
Gate mass - maximum1000Kg250kg8
Gate length - maximum50m50m
Gate speed (varies with load)4Up to 26m/min4Up to 45m/min8
Manual OverrideLockable with key releaseLockable with key release
Drive Pinion17T Module 420T Module 4
Operations in standby with 2x 7Ah batteriesPower saving (15m/min 15kgf) Normal (26m/min 15kgf)Power saving (15m/min 9kgf) Normal (45m/min 9kgf)
Half day2, 5, 6118 | 63189 | 130
Full day2, 5, 693 | 50150 | 104
Collision SensingElectronicElectronic
Operating temperature range-15°C to +50°C-15°C to +50°C
Onboard receiver typeCode-hopping multichannel receiver with selective add and deleteCode-hopping multichannel receiver with selective add and delete
Receiver code storage capacity1500 Remotes71500 Remotes7
Receiver frequency433.92MHz433.92MHz
Degree of protectionIP54IP54
Mass of unit packed (with standard kit, but excl. rack and battery)13Kg13.5Kg
Packaging dimensions (with standard kit, but excl. rack and battery)350mm wide x 282mm deep x 470mm high350mm wide x 282mm deep x 470mm high
  1. Can operate off a solar supply, consult your local dealer for assistance
  2. Based on 25°C ambient temperature and unit not in direct sunlight
  3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
  4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
  5. Can increase battery capacity for longer standby times
  6. Based on 4m gate, excluding all accessories
  7. Multiple buttons per remote can be used
  8. Refer to the table below for D10 TURBO SMΔRT’s recommended gate speed for specified gates masses
  • New
D20 SMART sliding gate motor for heavy gates D20 SMART sliding gate motor for heavy gates
D20 SMART sliding gate motor for heavy gates
Availability: In Stock
₦1.9M

Technical Specifications:

Input voltage90V - 240V AC +/-10% @ 50Hz1
Current consumption (Mains)250mA
Battery charger current output1.8A @ 27.4V +/-1%
Maximum number of operations per day750.2, 5
Duty cycle - Mains present2, 345%
Motor voltage24V DC
Motor power supplyBattery-driven (Standard Capacity - 2x 7.2Ah)3
Current consumption (motor at rated load)9A
Input / Output sink currents (Max accessory current draw)
I/O 1-4100mA (12/24V)
I/O 5 and 63A (12/24V) 10sec Pulse
Motor push force - starting52kgf
Motor push force - rated39kgf
Gate mass - maximum2000kg
Gate length - maximum25m
Gate speed (varies with load)2, 5Up to 18m/min3
Manual OverrideLockable lever with key release
Drive Pinion13T Module 4
Operations in standby with 2x 7.2Ah batteriesPower Saving (15m/min 20kgf) | Normal (18m/min 20kgf)
Half day2, 3, 4101 | 55
Full day2, 3, 480 | 45
Collision SensingElectronic
Operating temperature range-15°C to +50°C
Onboard receiver typeCENTURION rolling code (Keeloq encryption) multichannel
Receiver code storage capacity1500 Remotes6
Receiver frequency433.92MHz
Degree of protectionIP54
Mass of unit packed (with standard kit, but excl. rack and battery)13Kg
Packaging dimensions (with standard kit, but excl. rack and battery)350mm wide x 282mm deep x 470mm high

1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used

  • New

Product category- Auto-Gate

busy...

We use cookies to improve user experience, and analyze website traffic. For these reasons, we may share your site usage data with our analytics partners. By continuing to the site, you consent to store on your device all the technologies described in our cookie policy. Here is the the cookie policy